Currently, building materials and labor costs are increasing each day. Therefore, many people are considering carrying out their construction work or at least, engage others as they do the job for them. Thus, for any layman constructing their House Extension Architecture in Ealing, below are some simple steps to make things a lot easier.
- order neurontin online Sorting out official matters
You will require an experienced architect to assist in drawing up a set of plans for you, ensure that they make the measurements clear and precise for this enables easy following.
Also, request them for a full specification to help in knowing the exact materials required. Additionally, submit the plans to your local planning office for them to grant you the permit to build.
- buy gabapentin otc Clearing and leveling
You’ll need to strip the construction area of all vegetation and level the ground. Also, check the surrounding places to confirm if there are any service connections, for instance; telephone wirings, gas water, and electricity to avoid crashing them while digging the foundations.
It’s best to contact a professional to set out the pegs, dig and build the profiles since they require being accurate.
- Commence digging
Numerous drawings and local authorities insist that the foundation depth should be one meter. But, if the ground is soft, the inspector could even make you go deeper. This would be pricier as you would require more building supplies.
- Building the block work
You can attempt this by yourself or use the services of a bricklayer. You also need to prepare the oversite which will need filling with hardcore or similar materials. Moreover, all the measurements and specification quantities should reflect on your drawing. Therefore you can do this by yourself.
- Constructing the main building
In case you opt to do this yourself, then you need to have some tools for instance; hammers, line pins, trowels, a spirit level and a book explaining the types of bonds and mortar mixes. Once you reach the required height, then you’re ready for the roof.
- Bedding wall plates
Depending on the complexity of the roof, you may require the services of a tradesman. However, you first need to bed the wall plates in position ready for the main roof.
- Fixing the roof covering
For a flat roof, you need a tradesperson equipped with all the essential tools to carry out the task. However, for tiled roofs, you can attempt this on own since there are helpful books that explain the method.
- Internal works/ finishing
You can commence on the interior works now. However, you need a plumber and an electrician to do the initial fixing.
After this, you can continue with fixing the ceilings and plastering. For the ceilings, you can fix them for yourself, but since plastering requires being smooth and flat, you need professional for the task. Also, get plumbers and electricians to do the second fixing at this stage.
- Carpentry/ decoration
You will need to decide if you want to attempt to hang the doors as well as fix the skirting boards. Once you’re done with that, you’re ready for the finishing touches for instance decorating, fixing the outside gutters and any paths or paving.