The automatic iron gates, swing gates and the sliding gates are susceptible to rust as they weather out during the climatic changes. These gates are either made with wrought iron or steel by mixing with other metals. But long-term heat exposure, wind and rain can erode these iron gates and make them look dull and bad. Hence, if you want to keep the iron gates in good condition, you should protect them and maintain them from time to time.
If you are one of them who are interested in installing a new wrought iron gate for office or home, consult with a team who will come to your place and install it. Well, these gates will look great in your residential or commercial space. You must protect the investment you have spent on these gates. The benefits of installing the wrought Iron gate are highly durable and strong compared to other types of gates available in the market. However, these gates are subject to damage and scratches if they are not properly taken care of. You want to install the wrought iron gate to increase curb details and increase the value of your home. But, if it turns into a damaged and corroded gate, your investment will go to vain.
So, it is very important to protect the gate. You should start treating the gate from the beginning when you identify the gate’s small spots. Here are some steps that you should follow-
- General Maintenance
To be sure that you are taking care of the iron gate, you should have a habit to check every 6-10 months to check whether there is any growth of weeds or not. If you see any, be careful to remove it from the gate.
- Washing the Gate
Be sure to wash the gate every 6-12 months. Take a bucket filled with water, put some regular dish soap, and use a sponge or a towel to clean the gate. Once you clean the gate, you can go ahead and hose it with cold water. While you are cleaning the gate, make sure that you are looking for rust areas. If you find rust on any portion of the gate that is too narrow to move your hand inside, use a toothbrush to clean it.
- Scrub Away With Sand Paper
Rust on these gates can also be easily removed by sandpaper. First, scrub away the rust with the sandpaper and apply a primer with rust inhibitors. Then apply the two coat of primer to have a long-lasting effect but keep in mind to wait for some time and let the first coat dry and then apply the second coat.
It is a good option to clean away steel or wrought iron gates. Galvanization is the technique to apply a coating over iron gates with zinc when the iron object is dipped in the molten zinc, and this layer helps protect the gates from rust.
No matter what type of gate you use, iron and wood gates need special care and maintenance is you want them to last long.